Machine Comparison
Okuma GENOS M460-VE vs Okuma GENOS M560-V
Okuma vs Okuma · Vertical Machining Centers
Summary
The Okuma GENOS M460-VE and Okuma GENOS M560-V are neighboring sizes in Okuma's GENOS vertical machining center line, and the table shows them as identical except for the work area. The M560-V has a 1300 × 560 mm (51.18 × 22.05 in) table against 1,000 × 460 mm (39.37 × 18.11 in) on the M460-VE.
Everything else listed is shared: a 15,000 rpm spindle, 22/18.5 kW (30/25 hp) of power, 32 tools, and rapids of 40 m/min on X-Y and 32 m/min on Z (1,575 and 1,262 ipm). The choice therefore comes down to part size and how many parts you want to fixture per cycle.
Specifications Comparison
| Specification | Okuma GENOS M460-VE | Okuma GENOS M560-V |
|---|---|---|
| Table Size | 1,000 × 460 mm (39.37 × 18.11 in) | 1300 × 560 mm (51.18 × 22.05 in) |
| Max Spindle Speed | 15,000 rpm | 15,000 rpm |
| Spindle Power | 22/18.5 kW (30/25 hp) | 22/18.5 kW (30/25 hp) |
| Tool Capacity | 32 | 32 |
| Rapid Traverse | X-Y 40, Z: 32 m/min (X-Y: 1,575, Z: 1,262 ipm) | X-Y 40, Z: 32 m/min (X-Y: 1,575, Z: 1,262 ipm) |
Advantages
Okuma GENOS M460-VE
- Compact machine with a 1,000 × 460 mm (39.37 × 18.11 in) table, aimed at shops short of floor space
- The same 15,000 rpm spindle and 32 tools as the larger model in the smaller frame
Okuma GENOS M560-V
- 1300 × 560 mm (51.18 × 22.05 in) table against 1,000 × 460 mm
- Room for multi-part fixtures and long plates across the full table width
Verdict
With the spindle, tooling and rapids identical, buy on table size. The Okuma GENOS M460-VE suits small-to-medium parts and shops short on floor space, where a 1,000 × 460 mm table is enough. The Okuma GENOS M560-V suits job shops whose part sizes vary, long plates and multi-part fixtures that need the 1300 × 560 mm table. If a growing share of work overhangs the smaller table, the M560-V is the safer buy.