Machine Comparison
Hurco VM10UHSi vs Hurco VM10Ui
Hurco vs Hurco · 5-Axis Machining Centers
Summary
The Hurco VM10UHSi and Hurco VM10Ui are both from Hurco's 5-axis machining centers lineup, making this a common upgrade or lineup decision for shops already invested in the Hurco ecosystem. The Hurco VM10UHSi leads in max spindle speed (20,000 RPM vs 12,000 RPM). The Hurco VM10Ui leads in tool capacity (24 (arm-type ATC) vs 20 (arm-type ATC)). The Hurco VM10UHSi leads in spindle power (8.5 kW (11.4 hp) peak vs 7.5 kW (10 hp) peak). These machines are closely matched across most specifications, making the decision more about specific feature priorities, dealer support, and your existing shop ecosystem than raw spec advantages. Both machines are proven performers in production environments and represent solid investments for shops in the market for a 5-axis machining center.
Specifications Comparison
| Specification | Hurco VM10UHSi | Hurco VM10Ui |
|---|---|---|
| X-Axis Travel | 533 mm (21 in) | 533 mm (21 in) |
| Y-Axis Travel | 406 mm (16 in) | 406 mm (16 in) |
| Z-Axis Travel | 483 mm (19 in) | 483 mm (19 in) |
| Max Spindle Speed | 20,000 RPM ▲ | 12,000 RPM |
| Spindle Power | 8.5 kW (11.4 hp) peak ▲ | 7.5 kW (10 hp) peak |
| Spindle Torque | 5.4 Nm (4.0 ft-lbs) @ 600 RPM | 47.7 Nm (35.2 ft-lbs) @ 1,500 RPM ▲ |
| Tool Capacity | 20 (arm-type ATC) | 24 (arm-type ATC) ▲ |
| Machine Weight | 3,102 kg (6,825 lb) ▲ | 3,360 kg (7,392 lb) |
| Control | Hurco WinMax | Hurco WinMax |
| A Axis Range | +30° / -110° | +30° / -110° |
| C Axis Range | 360° | 360° |
| Spindle Taper | BT 30 | CAT 40 / Big Plus |
| Rotary Table Diameter | 198 mm (7.8 in) | 198 mm (7.8 in) |
| Max Table Load | 150 kg (330 lb) | 150 kg (330 lb) |
| Price Range | $130,000 - $170,000 (new) | $75,000 - $110,000 (used) | $120,000 - $160,000 (new) | $70,000 - $100,000 (used) ▲ |
Advantages
Hurco VM10UHSi
- Higher maximum spindle speed of 20,000 RPM enables faster cutting on aluminum and non-ferrous materials
- More spindle power at 8.5 kW (11.4 hp) peak for aggressive material removal in harder materials
- Lighter at 3,102 kg (6,825 lb), potentially easier installation and lower foundation requirements
Hurco VM10Ui
- Superior spindle torque at 47.7 Nm (35.2 ft-lbs) @ 1,500 RPM vs 5.4 Nm (4.0 ft-lbs) @ 600 RPM
- Larger tool magazine with 24 (arm-type ATC) capacity reduces manual tool changes on complex parts
- More competitive pricing at $120,000 - $160,000 (new) | $70,000 - $100,000 (used) compared to $130,000 - $170,000 (new) | $75,000 - $110,000 (used)
Verdict
This is a close matchup. The Hurco VM10UHSi and Hurco VM10Ui trade advantages across different specifications, making neither a clear winner on paper alone. Your decision should come down to practical factors: which dealer is closer, which control system your operators already know, what tooling ecosystem you're invested in, and which machine's specific strengths match your highest-volume work. Get quotes on both, run test cuts with your actual parts if possible, and factor in long-term service and support costs.