Machine Comparison
DMG Mori ALX 2000 vs Takamaz XD-10I
DMG Mori vs Takamaz · CNC Lathes
Summary
The DMG Mori ALX 2000 and the Takamaz XD-10I are both CNC lathes, but they serve different jobs. The DMG Mori ALX 2000 is a general turning center for bar and chuck work. The Takamaz XD-10I is a twin-spindle machine with two turrets, built to finish small parts on both ends in volume.
The travel figures show the gap: 260 mm (10.2 in) of X and 575 mm (22.6 in) of Z on the DMG Mori ALX 2000, against 120 mm (4.7 in) and 130 mm (5.1 in) per turret on the Takamaz XD-10I. The DMG Mori ALX 2000 also rapids faster, 30 m/min (1,181.1 ipm) against 20 m/min (787 IPM). Takamaz lists a floor plan of approx. 3,000 x 1,700 mm (118 x 67 in); DMG Mori quotes 2.7 m2 (29.1 ft2) for the 300 turning specification only.
Specifications Comparison
| Specification | DMG Mori ALX 2000 | Takamaz XD-10I |
|---|---|---|
| X-Axis Travel | 260 mm (10.2 in) ▲ | 120 mm (4.7 in) per turret |
| Z-Axis Travel | 575 mm (22.6 in) ▲ | 130 mm (5.1 in) per turret |
| Rapid Traverse | 30 m/min (1,181.1 ipm), X- and Z-axis ▲ | 20 m/min (787 IPM) |
| Floor Space | 2.7 m2 (29.1 ft2) for the ALX 2000 | 300 turning specification | Approx. 3,000 x 1,700 mm (118 x 67 in) |
Advantages
DMG Mori ALX 2000
- 575 mm (22.6 in) of Z travel against 130 mm (5.1 in) per turret
- 260 mm (10.2 in) of X travel against 120 mm (4.7 in) per turret
- 30 m/min (1,181.1 ipm) rapids against 20 m/min (787 IPM)
Takamaz XD-10I
- Two turrets, each with 120 mm (4.7 in) of X and 130 mm (5.1 in) of Z, to machine both ends of a part in one cycle
- Can replace two single-spindle lathes for high-volume fittings, bushings and spacers
Verdict
These are different tools for different work. The DMG Mori ALX 2000 is the choice for varied bar and chuck parts, longer shafts and anything needing more than 130 mm (5.1 in) of Z. The Takamaz XD-10I is the choice for short parts made in large quantities that need both ends machined without manual handling, where its twin-spindle layout matters more than its 20 m/min rapids.