Machine Comparison
Amada HG-2204 ATC vs Amada HRB 8025/1003/2204
Amada vs Amada · CNC Press Brakes
Summary
The Amada HG-2204 ATC is a single press brake with an automatic tool changer; the Amada HRB 8025/1003/2204 page covers three sizes of the HRB series. Amada publishes few comparable figures for this pair, and after re-verification no specification row is listed for both, so the table is empty and no figure is compared here.
By typical use the two serve different work. The Amada HG-2204 ATC suits high-mix bending with many tool changes per shift and short runs of long parts. The Amada HRB 8025/1003/2204 series suits general sheet-metal bending, from brackets and covers on the shortest machine to long panels on the longest.
Specifications Comparison
| Specification | Amada HG-2204 ATC | Amada HRB 8025/1003/2204 |
|---|
Advantages
Amada HG-2204 ATC
- Automatic tool changer for high-mix work with many tool changes per shift
- Suits short runs of long parts
Amada HRB 8025/1003/2204
- Three sizes to choose from, so the bed length can match the parts
- Suits general sheet-metal bending, from brackets and covers to long panels
Verdict
Choose by how often the tooling changes. A shop running short batches of varied parts, with many tool changes per shift, is the buyer for the Amada HG-2204 ATC. A shop doing general bending that first needs to settle on a bed length should work through the Amada HRB 8025/1003/2204 series. No figure is listed for both, so take tonnage, bend length and stroke from each machine's own page.