Eurotech E5-880

The B-axis tilts the milling spindle from -90° to +90° relative to the turning axis. At 0°, the milling head is perpendicular to the part — standard end milling and drilling. At ±90°, the milling head is parallel to the turning axis — enabling axial milling, back-turning, and features on angled faces. Between 0° and ±90°, the B-axis interpolates continuously with the other axes for simultaneous 5-axis contouring on complex sculptured surfaces. This eliminates the need to re-fixture parts for angled features.

The E5-880 has a lower VDI40 live-tool turret and the upper B-axis milling head. Both can be active simultaneously, allowing overlapped operations: for example, the lower turret can perform a roughing turning pass while the upper milling head drills cross-holes, or both can work on separate diameter zones of a long shaft simultaneously. The Fanuc or Siemens control synchronizes both cutting units on a shared Z-axis, with each unit having independent X-axis positioning.

The E5-1050 extends maximum turning length to 1,050 mm versus the E5-880's 880 mm, accommodating longer shaft and bar components. Bar capacity also increases on the 1050. Both models share the same 5-axis mill-turn architecture, B-axis milling head, and dual-turret capability. The E5-880 is the preferred choice for compact complex parts where the shorter length is not a constraint; the E5-1050 serves longer component families.

Yes. The E5-880 supports a bar feeder on the main spindle for bar-fed turning and mill-turn production. With 65 mm bar capacity and a sub-spindle for back-work and part-off, the machine operates as a full production turning/mill-turn cell with a long-bar or short-bar feeder. Iemca and LNS bar feeders are commonly integrated, with Eurotech providing interface specifications. Bar feeder selection should be specified at order time.

The Mazak Integrex e-410H is a larger mill-turn platform with a higher maximum turning diameter and longer bar capacity, targeting larger parts. The E5-880 is optimized for smaller, more complex components where the compact work envelope and 5-axis B-axis interpolation provide complete machining of tight-tolerance parts. Mazak's larger North American service and applications network is a significant practical advantage for North American shops; the E5-880 competes on technical specification and Italian build quality at a competitive price point.