Machine Comparison
Mazak MEGA Series vs Mazak MEGA 8800
Yamazaki Mazak vs Yamazaki Mazak · Horizontal Machining Centers
Summary
The Mazak MEGA Series and Mazak MEGA 8800 are both from Yamazaki Mazak's horizontal machining centers lineup, making this a common upgrade or lineup decision for shops already invested in the Yamazaki Mazak ecosystem. These machines are closely matched across most specifications, making the decision more about specific feature priorities, dealer support, and your existing shop ecosystem than raw spec advantages. Both machines are proven performers in production environments and represent solid investments for shops in the market for a horizontal machining center.
Specifications Comparison
| Specification | Mazak MEGA Series | Mazak MEGA 8800 |
|---|---|---|
| X-Axis Travel | 1,300 mm (51.2 in) | 1,300 mm (51.2 in) |
| Y-Axis Travel | 1,100 mm (43.3 in) | 1,100 mm (43.3 in) |
| Z-Axis Travel | 1,200 mm (47.2 in) | 1,200 mm (47.2 in) |
| Max Spindle Speed | 4,000 RPM | 4,000 RPM |
| Spindle Power | 85 kW (114 hp) at 15% ED | 85 kW (114 hp) at 15% ED |
| Spindle Torque | 1,249 Nm (921 ft-lb) at 15% ED | 1,249 Nm (921 ft-lb) at 15% ED |
| Tool Capacity | 60 tools standard (up to 348 optional) | 60 tools standard (up to 348 optional) |
| Rapid Traverse | 36 m/min (1,417 ipm) | 36 m/min (1,417 ipm) |
| Control | MAZATROL SmoothG CNC | MAZATROL SmoothG CNC |
| Spindle Taper | CAT 50 | CAT 50 |
| Spindle Bore | 130 mm (5.12 in) | 130 mm (5.12 in) |
| Pallet Size | 800 x 800 mm (31.5 x 31.5 in) | 800 x 800 mm (31.5 x 31.5 in) |
| Max Workpiece Size | 1,450 mm dia x 1,450 mm H (57.1 x 57.1 in) | 1,450 mm dia x 1,450 mm H (57.1 x 57.1 in) |
| Tool Change Time | 5.5 sec chip-to-chip | 5.5 sec chip-to-chip |
| Price Range | $800,000 - $1,200,000 | $800,000 - $1,200,000 |
Advantages
Mazak MEGA Series
- Backed by Yamazaki Mazak's dealer and service network for parts and support
- Aerospace manufacturers rough-machining titanium, Inconel, and other difficult-to-cut alloys where spindle torque is the limiting factor
Mazak MEGA 8800
- Backed by Yamazaki Mazak's dealer and service network for parts and support
- Aerospace manufacturers roughing titanium structural components, landing gear parts, and engine casings where torque determines cycle time
Verdict
This is a close matchup. The Mazak MEGA Series and Mazak MEGA 8800 trade advantages across different specifications, making neither a clear winner on paper alone. Your decision should come down to practical factors: which dealer is closer, which control system your operators already know, what tooling ecosystem you're invested in, and which machine's specific strengths match your highest-volume work. Get quotes on both, run test cuts with your actual parts if possible, and factor in long-term service and support costs.