Machine Comparison
Hurco TM10i vs Okuma 2SP-150H
Hurco vs Okuma · CNC Lathes
Summary
The Hurco TM10i and the Okuma 2SP-150H are both CNC lathes, but they are built for different parts. The Hurco TM10i is a general-purpose turning center with a 260 mm (10.24 in) chuck and 758 mm (29.84 in) of turning length. The Okuma 2SP-150H is a two-spindle machine with a 6 in (150 mm) chuck for short parts: 80 mm (3.15 in) of turning length, or 150 mm (5.91 in) without the loader.
The Hurco has twice the spindle power, 22 kW (29.5 hp) against 11/7.5 kW (15/10 hp), and faster rapids, 30 m/min against 24 m/min (945 ipm). The Okuma has the higher spindle speed, a 50–4,500 rpm range against 3,000 rpm.
Specifications Comparison
| Specification | Hurco TM10i | Okuma 2SP-150H |
|---|---|---|
| Max Turning Length | 758 mm (29.84 in) ▲ | 80 mm (3.15 in), 150 mm (5.91 in) without loader |
| Chuck Size | 260 mm (10.24 in) | 6 in (150 mm) |
| Max Spindle Speed | 3,000 rpm | 50–4,500 rpm ▲ |
| Spindle Power | 22 kW (29.5 hp) ▲ | 11/7.5 kW (15/10 hp) |
| Rapid Traverse | 30 m/min / 1181 ipm ▲ | 24 m/min (945 ipm) |
Advantages
Hurco TM10i
- 758 mm (29.84 in) turning length against 80 mm (3.15 in)
- Larger chuck: 260 mm (10.24 in) against 6 in (150 mm)
- 22 kW (29.5 hp) spindle against 11/7.5 kW (15/10 hp)
- 30 m/min rapids against 24 m/min (945 ipm)
Okuma 2SP-150H
- Higher spindle speed: up to 4,500 rpm against 3,000 rpm
- Two spindles of equal rating for two-operation turning
- Loader-fed layout for short chucked parts
Verdict
Choose by part shape. The Hurco TM10i fits shafts, long chucked parts and large-diameter work that need 758 mm (29.84 in) of turning length, a 260 mm (10.24 in) chuck and 22 kW (29.5 hp) for heavier roughing cuts in steel. The Okuma 2SP-150H fits volume runs of short, small-diameter parts within 80 mm (3.15 in), where two spindles, loader feeding and speeds up to 4,500 rpm finish both operations in one machine.