Machine Comparison
Haas CM-1 vs Mazak FJV 5-Face
Haas Automation vs Yamazaki Mazak · Vertical Machining Centers
Summary
The Haas CM-1 and the Mazak FJV 5-Face are both vertical machining centers, but they serve different jobs. The Haas CM-1 is a compact high-speed mill for small parts within 12 x 10 x 14 in (305 x 254 x 356 mm), with an ISO 20 spindle. The Mazak FJV 5-Face is a family of large machines for plates, bases and frames machined on five faces in one clamping, with X travel from 59.06 in (1,500 mm) to 165.35 in (4,200 mm) and a CAT No.50 spindle.
The Haas CM-1 spins three times as fast, 30,000 rpm against 10,000 rpm. The Mazak FJV 5-Face is rated 30 kW (40 HP) continuous and 176 ft-lb (239 Nm) against 5 hp (3.7 kW) and 8 ft-lbf (10.8 N·m), carries 30 tools to 60 tools against 20, and takes 5,512 lb (2,500 kg) to 22,046 lb (10,000 kg) on the table against 150 lb (68 kg).
Specifications Comparison
| Specification | Haas CM-1 | Mazak FJV 5-Face |
|---|---|---|
| X-Axis Travel | 12 in (305 mm) | 59.06 in (1,500 mm) to 165.35 in (4,200 mm) |
| Y-Axis Travel | 10 in (254 mm) | 31.5 in (800 mm) to 96.46 in (2,450 mm) |
| Z-Axis Travel | 14 in (356 mm) | 25.98 in (660 mm) ▲ |
| Max Table / Workpiece Load | 150 lb (68 kg) | 5,512 lb (2,500 kg) to 22,046 lb (10,000 kg) |
| Max Spindle Speed | 30,000 rpm ▲ | 10,000 rpm |
| Spindle Power | 5 hp (3.7 kW) | 30 kW (40 HP) continuous ▲ |
| Spindle Torque | 8 ft-lbf @ 3,000 rpm (10.8 N·m @ 3,000 rpm) | 176 ft-lb (239 Nm) continuous ▲ |
| Spindle Taper / Nose | ISO 20 | CAT No.50 |
| Tool Capacity | 20 | 30 tools to 60 tools |
| Rapid Traverse | 757 ipm (19.2 m/min) | 886 ipm (23 m/min) to 1,575 ipm (40 m/min) |
| Machine Weight | 2,200 lb (998 kg) | 41,226 lb (18,700 kg) to 103,616 lb (46,999 kg) |
Advantages
Haas CM-1
- 30,000 rpm spindle against 10,000 rpm, for micro-milling and engraving with small cutters
- A 2,200 lb (998 kg) machine against 41,226 lb (18,700 kg) or more
- Runs on 220 VAC single-phase power
Mazak FJV 5-Face
- X travel from 59.06 in (1,500 mm) to 165.35 in (4,200 mm) against 12 in (305 mm)
- Table load from 5,512 lb (2,500 kg) to 22,046 lb (10,000 kg) against 150 lb (68 kg)
- 30 kW (40 HP) continuous and 176 ft-lb (239 Nm) against 5 hp (3.7 kW) and 8 ft-lbf (10.8 N·m)
- 30 tools to 60 tools against 20, and rapids from 886 ipm (23 m/min) against 757 ipm (19.2 m/min)
Verdict
Choose the Haas CM-1 for micro-milling, engraving and fine-detail work on small, light parts under 150 lb (68 kg), where 30,000 rpm and small cutters matter more than torque. Choose the Mazak FJV 5-Face for large cast iron and steel plates, bases and frames machined on five faces in one clamping, with X travel up to 165.35 in (4,200 mm), table loads up to 22,046 lb (10,000 kg) and a 50-taper spindle.