Machine Comparison
Enshu GE460H vs Enshu JE80
Enshu vs Enshu · Horizontal Machining Centers
Summary
The Enshu GE460H and the Enshu JE80 are both horizontal machining centers from the same maker, but they serve different jobs. The Enshu GE460H is a 40-taper machine with 23.6″ of travel in each axis. The Enshu JE80 is a 50-taper machine with 1,100 x 900 x 900 mm (43.3 x 35.4 x 35.4 in) of travel.
The Enshu JE80 is stronger on envelope: 1,100 mm (43.3 in) of X against 23.6″, and 900 mm (35.4 in) of Y and Z against 23.6″. The Enshu GE460H is stronger on axis speed, with rapids of 3543 IPM against 40 m/min (1,575 ipm). The tapers differ too: BIG-PLUS® CAT 40, with BT and HSK listed as options, against BT-50. Both run FANUC 31i-series controls, the 31iMB and the 31i-B5.
Specifications Comparison
| Specification | Enshu GE460H | Enshu JE80 |
|---|---|---|
| X-Axis Travel | 23.6″ | 1,100 mm (43.3 in) ▲ |
| Y-Axis Travel | 23.6″ | 900 mm (35.4 in) ▲ |
| Z-Axis Travel | 23.6″ | 900 mm (35.4 in) ▲ |
| Spindle Taper / Nose | BIG-PLUS® CAT 40 (OP: BT / HSK) | BT-50 |
| Rapid Traverse | 3543 IPM ▲ | 40 m/min (1,575 ipm) |
| Control | FANUC 31iMB | Fanuc 31i-B5 |
Advantages
Enshu GE460H
- Rapid traverse of 3543 IPM against 40 m/min (1,575 ipm)
- BIG-PLUS® CAT 40 spindle, with BT and HSK listed as options, suited to aluminum and light-alloy parts
- A 23.6″ cube of travel sized for small prismatic parts and multi-face tombstone work
Enshu JE80
- 1,100 mm (43.3 in) of X travel against 23.6″
- 900 mm (35.4 in) of Y and Z travel against 23.6″
- BT-50 spindle taper for large steel and cast iron parts
Verdict
Choose by part size and material. The Enshu GE460H fits aluminum and light-alloy prismatic parts and multi-face tombstone work that stay inside a 23.6″ cube, where 3543 IPM rapids shorten the time between cuts. The Enshu JE80 fits large steel and cast iron parts that need 1,100 mm (43.3 in) of X travel and a BT-50 spindle, including deep drilling and boring. The two overlap very little, so the part decides.