Machine Comparison
DN Solutions MYNX 6500/II vs DN Solutions SVM 4100
DN Solutions vs DN Solutions · Vertical Machining Centers
Summary
The DN Solutions MYNX 6500/II and DN Solutions SVM 4100 are both from DN Solutions's vertical machining centers lineup, making this a common upgrade or lineup decision for shops already invested in the DN Solutions ecosystem. The DN Solutions SVM 4100 leads in max spindle speed (12,000 RPM vs 6,000 RPM). The DN Solutions SVM 4100 leads in spindle power (18.5 kW (25 hp) vs 15 kW (20 hp)). These machines are closely matched across most specifications, making the decision more about specific feature priorities, dealer support, and your existing shop ecosystem than raw spec advantages. Both machines are proven performers in production environments and represent solid investments for shops in the market for a vertical machining center.
Specifications Comparison
| Specification | DN Solutions MYNX 6500/II | DN Solutions SVM 4100 |
|---|---|---|
| Max Spindle Speed | 6,000 RPM | 12,000 RPM ▲ |
| Spindle Power | 15 kW (20 hp) | 18.5 kW (25 hp) ▲ |
| Spindle Torque | 286.5 Nm (211 ft-lb) ▲ | 95.5 Nm (70 ft-lb) |
| Table Size | 1,400 x 670 mm (55 x 26 in) ▲ | 920 x 410 mm (36 x 16 in) |
| Control | FANUC 0i-Plus with iHMI | Fanuc 0i-Plus with 15" iHMI touchscreen |
| Spindle Taper | BIG-PLUS CAT 50 (BT50) | ISO 40 (BT40) |
| Table Load Capacity | 1,300 kg (2,866 lb) ▲ | 600 kg (1,323 lb) |
| Rapid Traverse Z | 24 m/min (945 ipm) | 36 m/min (1,417 in/min) ▲ |
| Machine Weight | 9,500 kg (20,944 lb) ▲ | 3,850 kg (8,488 lb) |
| Price Range | $150,000 - $220,000 | $65,000 - $95,000 ▲ |
Advantages
DN Solutions MYNX 6500/II
- Superior spindle torque at 286.5 Nm (211 ft-lb) vs 95.5 Nm (70 ft-lb)
- Superior table size at 1,400 x 670 mm (55 x 26 in) vs 920 x 410 mm (36 x 16 in)
- Superior table load capacity at 1,300 kg (2,866 lb) vs 600 kg (1,323 lb)
- Superior machine weight at 9,500 kg (20,944 lb) vs 3,850 kg (8,488 lb)
DN Solutions SVM 4100
- Higher maximum spindle speed of 12,000 RPM enables faster cutting on aluminum and non-ferrous materials
- More spindle power at 18.5 kW (25 hp) for aggressive material removal in harder materials
- Superior rapid traverse z at 36 m/min (1,417 in/min) vs 24 m/min (945 ipm)
- More competitive pricing at $65,000 - $95,000 compared to $150,000 - $220,000
Verdict
This is a close matchup. The DN Solutions MYNX 6500/II and DN Solutions SVM 4100 trade advantages across different specifications, making neither a clear winner on paper alone. Your decision should come down to practical factors: which dealer is closer, which control system your operators already know, what tooling ecosystem you're invested in, and which machine's specific strengths match your highest-volume work. Get quotes on both, run test cuts with your actual parts if possible, and factor in long-term service and support costs.