Machine Comparison
DN Solutions DNX 2100 vs Willemin-Macodel 408MT
DN Solutions vs Willemin-Macodel · Mill-Turn Machines
Summary
The DN Solutions DNX 2100 and the Willemin-Macodel 408MT are both mill-turn machines, but the makers publish few comparable figures for this pair: the table has a single row, maximum spindle speed. The DN Solutions DNX 2100 is listed at 5,000 rpm, the Willemin-Macodel 408MT at 30,000 min-1 (42,000 min-1).
That gap says more about the work each machine is built for than about one being quicker at the same job. The DN Solutions DNX 2100 is aimed at shafts and long parts turned and milled in one setup, with a B-axis for angled holes and faces. The Willemin-Macodel 408MT finishes small turned and milled parts from bar, with fast tool changes.
Specifications Comparison
| Specification | DN Solutions DNX 2100 | Willemin-Macodel 408MT |
|---|---|---|
| Max Spindle Speed | 5,000 rpm | 30,000 min-1 (42,000 min-1) ▲ |
Advantages
DN Solutions DNX 2100
- Aimed at shafts and long parts turned and milled in one setup
- B-axis for angled holes and faces, plus the eccentric turning cycle DN Solutions lists
Willemin-Macodel 408MT
- 30,000 min-1 (42,000 min-1) maximum spindle speed against 5,000 rpm
- Finishes small turned and milled parts from bar in one setup, with fast tool changes
Verdict
With one published row, the choice rests on part type more than on figures. Pick the DN Solutions DNX 2100 for shafts and long parts that need turning, milling and angled B-axis features in one setup. Pick the Willemin-Macodel 408MT for small bar-fed parts where spindle speed, listed at 30,000 min-1 (42,000 min-1) against 5,000 rpm, and fast tool changes carry the cycle. Get travel, power and tool figures from both makers before comparing further.