Machine Comparison
DMG Mori SPRINT 20|5 vs Star Micronics eCA-S20
DMG Mori vs Star Micronics · Swiss-Type Lathes
Summary
The DMG Mori SPRINT 20|5 and the Star Micronics eCA-S20 are both Swiss-type lathes for small bar work, but the makers publish few comparable figures for this pair: the table has one row, the number of axes. The DMG Mori SPRINT 20|5 has 5 linear axes and up to 2 C-axes. The Star Micronics eCA-S20 has 10 axes.
The axis count is a guide to how much work can overlap. The Star's 10 axes suit parts with overlapping front and back operations. The DMG Mori's layout suits turned parts with light cross drilling and milling, machined front and back on the main and counter spindle. No travel, spindle or tool figures can be compared here.
Specifications Comparison
| Specification | DMG Mori SPRINT 20|5 | Star Micronics eCA-S20 |
|---|---|---|
| Axes | 5 linear axes and up to 2 C-axes | 10 |
Advantages
DMG Mori SPRINT 20|5
- 5 linear axes and up to 2 C-axes, enough for front and back machining on main and counter spindle
- Suited to turned parts with light cross drilling and milling
Star Micronics eCA-S20
- 10 axes against 5 linear axes and up to 2 C-axes
- Suited to parts with overlapping front and back operations, including power-driven back-end tooling
Verdict
With one comparable row, the choice comes down to part complexity. Choose the Star Micronics eCA-S20 when parts need overlapping front and back operations and its 10 axes are put to use. Choose the DMG Mori SPRINT 20|5 for simpler turned parts with light cross drilling and milling, where 5 linear axes and up to 2 C-axes cover the work. Bar capacity, spindle speeds and tool counts should be checked on each machine's own page.