Machine Comparison
DMG Mori SPRINT 20|5 vs INDEX C100
DMG Mori vs INDEX-Traub · Swiss-Type Lathes
Summary
The DMG Mori SPRINT 20|5 from DMG Mori and INDEX C100 from INDEX-Traub are direct competitors in the swiss-type lathes category. These machines are closely matched across most specifications, making the decision more about specific feature priorities, dealer support, and your existing shop ecosystem than raw spec advantages. Both machines are proven performers in production environments and represent solid investments for shops in the market for a swiss-type lathe.
Specifications Comparison
| Specification | DMG Mori SPRINT 20|5 | INDEX C100 |
|---|---|---|
| Control | Fanuc 32i | Fanuc 31i-B |
| Max Bar Capacity | 20 mm (0.79 in) | 42 mm (1.65 in) ▲ |
| Main Spindle Speed | 10,000 RPM ▲ | 7,000 RPM |
| Counter Spindle Speed | 6,000 RPM | 7,000 RPM ▲ |
| Price Range | $180,000 - $280,000 ▲ | $300,000 - $450,000 |
Advantages
DMG Mori SPRINT 20|5
- Superior main spindle speed at 10,000 RPM vs 7,000 RPM
- More competitive pricing at $180,000 - $280,000 compared to $300,000 - $450,000
- Backed by DMG Mori's dealer and service network for parts and support
- Medical device manufacturers producing bone screws, dental implant components, and microsurgical instrument shafts
INDEX C100
- Superior max bar capacity at 42 mm (1.65 in) vs 20 mm (0.79 in)
- Superior counter spindle speed at 7,000 RPM vs 6,000 RPM
- Backed by INDEX-Traub's dealer and service network for parts and support
- High-volume production shops running complex turned parts that benefit from simultaneous three-turret machining to minimize cycle times
Verdict
This is a close matchup. The DMG Mori SPRINT 20|5 and INDEX C100 trade advantages across different specifications, making neither a clear winner on paper alone. Your decision should come down to practical factors: which dealer is closer, which control system your operators already know, what tooling ecosystem you're invested in, and which machine's specific strengths match your highest-volume work. Get quotes on both, run test cuts with your actual parts if possible, and factor in long-term service and support costs.