Machine Comparison
DMG Mori DMU 65 H monoBlock vs DMG Mori i 50
DMG Mori vs DMG Mori · Horizontal Machining Centers
Summary
The DMG Mori DMU 65 H monoBlock and the DMG Mori i 50 are both horizontal machining centers, but the table shows two different sizes of machine. The DMG Mori i 50 is the smaller machine, aimed at production lines; the DMG Mori DMU 65 H monoBlock has more travel in every axis and takes the heavier part.
Its travels are 650 x 950 x 700 mm against 500 x 550 x 500 mm, with the biggest gap in Y: 950 mm (37.4 in) against 550 mm (21.7 in). Rated load is 600 kg (1,322.8 lb) against 400 kg (881.8 lb). Floor space is published in two different forms, 139.9 ft² against 66.1 × 156.0 × 133.1 in. (width × depth × height) for the DMG Mori i 50, so the table names no winner on footprint.
Specifications Comparison
| Specification | DMG Mori DMU 65 H monoBlock | DMG Mori i 50 |
|---|---|---|
| X-Axis Travel | 650 mm (25.6 in) ▲ | 500 mm (19.7 in) |
| Y-Axis Travel | 950 mm (37.4 in) ▲ | 550 mm (21.7 in) |
| Z-Axis Travel | 700 mm (27.6 in) ▲ | 500 mm (19.7 in) |
| Max Table / Workpiece Load | 600 kg (1,322.8 lb) ▲ | 400 kg (881.8 lb) |
| Floor Space | 139.9 ft² | 66.1 × 156.0 × 133.1 in. (width × depth × height) |
Advantages
DMG Mori DMU 65 H monoBlock
- 950 mm (37.4 in) of Y travel against 550 mm (21.7 in)
- 650 mm (25.6 in) of X and 700 mm (27.6 in) of Z against 500 mm (19.7 in) in both
- 600 kg (1,322.8 lb) load against 400 kg (881.8 lb)
DMG Mori i 50
- Listed at 66.1 in. wide, for plants where floor width per machine is the constraint
- Suited to multi-machine production lines served by a gantry-type loader
Verdict
Choose the DMG Mori DMU 65 H monoBlock for tall or heavy parts and for shops that alternate between tower-fixtured batches and one-off 5-axis work: it offers 950 mm (37.4 in) of Y travel and a 600 kg (1,322.8 lb) load. Choose the DMG Mori i 50 for volume parts within 500 x 550 x 500 mm and 400 kg (881.8 lb), in lines where several machines stand side by side and floor width decides the layout.