Machine Comparison
DMG Mori CLX 450 TC vs Okuma MULTUS B200II
DMG Mori vs Okuma · Mill-Turn Machines
Summary
The DMG Mori CLX 450 TC and the Okuma MULTUS B200II are both B-axis multi-tasking machines for parts finished in one setup. The makers publish few comparable figures for this pair, so the table covers only spindle speed and tool capacity.
The Okuma MULTUS B200II main spindle runs at 50~6,000 min⁻¹, with a 45~5,000 min⁻¹ spindle as an extra-cost option; the DMG Mori CLX 450 TC is listed at up to 5,000 rpm. The DMG Mori CLX 450 TC carries more tools: 30 tools as standard and 60 tools as an extra-cost option, against 20 tools on the Okuma MULTUS B200II.
Specifications Comparison
| Specification | DMG Mori CLX 450 TC | Okuma MULTUS B200II |
|---|---|---|
| Max Spindle Speed | Up to 5,000 rpm (integrated spindle drives) | 50~6,000 min⁻¹ [45~5,000 min⁻¹ optional] |
| Tool Capacity | 30 tools; 60 tools optional ▲ | 20 tools |
Advantages
DMG Mori CLX 450 TC
- 30 tools as standard against 20 tools
- 60 tools available as an extra-cost option for changing part mixes
Okuma MULTUS B200II
- Main spindle range of 50~6,000 min⁻¹ against up to 5,000 rpm, for surface speed on small diameters
- Suits shops with limited floor area taking on multitasking work for the first time
Verdict
On the two published rows, the trade is tools against speed. The DMG Mori CLX 450 TC fits shops with a changing part mix that want 30 tools, or 60 tools as an option, kept in the magazine. The Okuma MULTUS B200II fits small-diameter precision work where its 6,000 min⁻¹ ceiling supplies surface speed. Compare travels and spindle power with both makers before deciding.