Machine Comparison
DMG Mori ALX 2000 vs SMEC PL 2000MS
DMG Mori vs SMEC · CNC Lathes
Summary
The DMG Mori ALX 2000 and the SMEC PL 2000MS are turning centers of the same class: both take 65 mm (2.6 in) bar and both rapid at 30 m/min. The SMEC PL 2000MS is aimed at parts turned and milled complete in one machine; the DMG Mori ALX 2000 covers the same ground when its milling or Y-axis specification is ordered.
The DMG Mori ALX 2000 has the longer cross travel, 260 mm (10.2 in) of X against 210 mm (8.3 in). Y travel is almost the same: 100 mm (3.9 in) on the DMG Mori ALX 2000 against +/-52.5 mm (+/-2.07 in) on the SMEC PL 2000MS, a margin too small to decide a purchase. Z travel is not in the table for this pair.
Specifications Comparison
| Specification | DMG Mori ALX 2000 | SMEC PL 2000MS |
|---|---|---|
| X-Axis Travel | 260 mm (10.2 in) ▲ | 210 mm (8.3 in) |
| Y-Axis Travel | 100 mm (3.9 in) | +/-52.5 mm (+/-2.07 in) ▲ |
| Bar Capacity | 65 mm (2.6 in) | 65 mm (2.6 in) |
| Rapid Traverse | 30 m/min (1,181.1 ipm), X- and Z-axis | 30 m/min |
Advantages
DMG Mori ALX 2000
- 260 mm (10.2 in) of X travel against 210 mm (8.3 in)
- Can be ordered as a plain turning machine or with a milling or Y-axis specification, to match the work
SMEC PL 2000MS
- Y travel of +/-52.5 mm (+/-2.07 in), marginally more than the 100 mm (3.9 in) of the DMG Mori ALX 2000
- Built for parts with cross holes, flats and milled features, removing second-operation setups
Verdict
With bar capacity and rapids equal, X travel and the intended work decide. The DMG Mori ALX 2000 gives 260 mm (10.2 in) of X against 210 mm (8.3 in), which helps on larger chuck parts, and suits shops that want to choose the specification machine by machine. The SMEC PL 2000MS suits bar-fed fittings, connectors and valve bodies that need turning and milling completed in one setup.