Tornos DECO 2000/8
Key Specifications
Number of Spindles
Maximum Bar Diameter
Maximum Part Length
Spindle Speed (Max)
Axial Slides per Position
Cross Slides per Position
Overview
The Tornos DECO 2000/8 is a high-production multi-spindle CNC automatic lathe designed for the precision parts industry. With eight spindles operating simultaneously, this machine delivers exceptional throughput for complex turned parts in medical, automotive, electronics, and hydraulics applications. Each spindle position can perform different operations concurrently, dramatically reducing cycle times compared to single-spindle alternatives.
Built on Tornos's decades of multi-spindle expertise, the DECO 2000/8 incorporates a fully programmable CNC architecture that brings the flexibility of modern machining to the high-volume world of multi-spindle production. The machine handles bar stock up to 20mm in diameter and supports a full complement of cross-working and axial tooling positions, enabling the simultaneous execution of turning, drilling, threading, milling, and slotting operations.
The DECO 2000/8 excels in environments where cycle time is paramount. Its eight-spindle drum rotates with precision indexing, ensuring part-to-part consistency even across millions of cycles. Integrated chip management, high-pressure coolant options, and automatic bar feeding make this a turnkey solution for lights-out production environments. The machine's rigid cast-iron construction minimizes thermal drift and vibration, supporting tight tolerance work across extended production runs.
Programming is handled through the Tornos B-series CNC with a graphical interface designed specifically for multi-spindle logic. Operators can simulate spindle-by-spindle operations before cutting, reducing setup time and scrap. The DECO 2000/8 represents the convergence of traditional Swiss precision manufacturing heritage and modern CNC flexibility, making it a benchmark machine in high-volume precision turning.
Full Specifications
| Parameter | Value |
|---|---|
| Number Of Spindles | 8 |
| Maximum Bar Diameter | 20 mm |
| Maximum Part Length | 60 mm |
| Spindle Speed (Max) | 8,000 rpm |
| Axial Slides Per Position | Up to 4 |
| Cross Slides Per Position | Up to 2 |
| Total Tool Positions | 56+ |
| CNC System | Tornos B-series (multi-spindle) |
| Bar Feed | Integrated magazine bar feeder |
| Coolant Pressure (Max) | 80 bar |
| Machine Weight | ~8,500 kg |
| Power Requirement | 45 kVA |
Specifications sourced from tornos.com — verified 2026-03-28
Strengths & Limitations
Strengths
- Eight simultaneous spindles reduce cycle times by up to 80% versus single-spindle production
- CNC flexibility allows rapid changeover between part families without mechanical cam changes
- Integrated bar feed and chip management support unattended lights-out production
- High-pressure coolant (up to 80 bar) extends tool life and improves surface finish on difficult materials
- Tornos multi-spindle heritage delivers proven reliability across millions of production cycles
Limitations
- High capital cost and complex setup make it unsuitable for low-volume or prototype work
- Programming multi-spindle synchronization requires specialized operator training
- 20mm bar capacity limits the range of parts compared to larger multi-spindle alternatives
Best For
Frequently Asked Questions
01
The DECO 2000/8 uses full CNC control rather than mechanical cams, enabling rapid changeover through program recall rather than physical cam replacement. This reduces setup time from hours to minutes when switching between part families, while maintaining the throughput advantages of multi-spindle production.
02
The DECO 2000/8 handles bar stock up to 20mm in diameter across all eight spindles, making it well-suited for small precision parts common in medical, electronics, and automotive applications.
03
Yes. Each spindle position supports axial and cross-working tools including live driven tools for milling, drilling off-center features, and thread milling. This enables complete part machining in a single setup on many geometries.
04
The machine runs the Tornos B-series CNC platform, which features a graphical programming environment specifically designed for multi-spindle logic. It allows operators to program, simulate, and optimize each spindle position independently before first article cuts.
05
Yes. The rigid cast-iron structure and high-pressure coolant system (up to 80 bar) make the DECO 2000/8 capable of machining stainless steel, titanium, and nickel alloys that are common in medical and aerospace precision parts production.
Videos
jeremydeath
Community Discussions
Community discussion — Deco 2000 - CNCzone
Community discussion — Tornos TB deco software manual - CNCzone
Community discussion — Deco 2000 Firmware Reflash - cnczone.com
Community discussion — Deco 2000 Firmware Reflash - cnczone.com
Links to community discussions. Summaries are editorial — visit the original thread for full context.