Davenport Hyper-B

The Davenport Hyper-B is a high-performance CNC multi-spindle automatic screw machine designed to push the throughput ceiling of the 5-spindle Davenport architecture to its practical maximum. Where the Model B CNC and E2000 series focus on combining reliable multi-spindle production with CNC flexibility, the Hyper-B prioritizes maximum production rate—targeting applications where parts-per-hour output is the dominant economic driver and where the cost per part advantage of extreme throughput justifies the machine investment.

The Hyper-B achieves elevated production rates through a combination of enhanced spindle drive performance, faster index time, optimized servo acceleration profiles, and mechanical refinements that reduce the non-cutting time components of each cycle. In multi-spindle production, reducing index time—the time required to rotate the spindle drum from one position to the next—directly reduces total cycle time since indexing cannot overlap with machining at the indexing position. The Hyper-B's faster index mechanism and optimized servo profiles compress this non-cutting time component, delivering more completed parts per shift on applications where total cycle time is governed more by machine dynamics than by machining content.

For applications where the part geometry requires relatively short cutting times at each spindle position, the Hyper-B's speed advantage over standard Davenport platforms is most pronounced. High-speed production of simple turned components in brass and free-machining aluminum—parts measured in fractions of seconds of actual cutting time per position—benefits most from the Hyper-B's mechanical speed optimization. Complex parts with longer cutting times at individual positions see proportionally less benefit from index time reduction, as the cutting time portion dominates total cycle time.

The Hyper-B retains full compatibility with the Davenport tooling ecosystem, operating with the same cross-slide tools, end-working attachments, and live tooling units as the E2000 and Model B CNC platforms. This tooling compatibility allows shops to integrate the Hyper-B into an existing Davenport operation without incurring tooling reinvestment costs, and ensures that operators trained on other Davenport platforms can work on the Hyper-B with minimal additional training.

The target market for the Hyper-B is the highest-volume screw machine production segment: shops running millions of parts per year on dedicated long-run programs where a percentage improvement in parts-per-hour output translates directly into meaningful revenue and margin improvement. Electronic component manufacturers, high-volume fastener producers, and automotive Tier 2 suppliers with multi-year single-part programs represent the ideal Hyper-B users.