Machine Comparison
Star Micronics eCA-S20 vs Tsugami B0125
Star Micronics vs Tsugami · Swiss-Type Lathes
Summary
The Star Micronics eCA-S20 and the Tsugami B0125 are both Swiss-type lathes, but the makers publish few comparable figures for this pair: the table holds a single row, the number of axes. There the gap is wide, with 10 axes on the Star Micronics eCA-S20 against 5 on the Tsugami B0125.
That difference points to different kinds of part. The eCA-S20 is aimed at small-diameter bar work where front and back operations overlap. The B0125 is aimed at small turned parts, long slender pins and two-ended parts finished on a back spindle.
Specifications Comparison
| Specification | Star Micronics eCA-S20 | Tsugami B0125 |
|---|---|---|
| Axes | 10 | 5 |
Advantages
Star Micronics eCA-S20
- 10 axes against 5, for parts with overlapping front and back operations
- Aimed at back-end work that includes power-driven tooling
Tsugami B0125
- 5 axes, a layout aimed at small turned parts and long slender pins from bar
- Suits two-ended parts finished on a back spindle
Verdict
The axis count is the only published figure, and it separates the jobs clearly enough. Parts that need front and back operations running at the same time, with driven tools on the back end, fit the Star Micronics eCA-S20 and its 10 axes. Small turned parts, long slender pins and simple two-ended work fit the Tsugami B0125 and its 5 axes. Compare bar capacity and spindle data from the makers before deciding.