Machine Comparison
Hyundai WIA LM1800TTSY vs Hyundai WIA LV800R
Hyundai WIA vs Hyundai WIA · CNC Lathes
Summary
The Hyundai WIA LM1800TTSY is a twin-turret turning center with a sub-spindle and an 8 in (203 mm) chuck, built to turn and mill small parts complete. The Hyundai WIA LV800R is a vertical lathe that clamps heavy rings, flanges and housings on an 800 mm (31.5 in) table. They are in different size classes and serve different jobs, and Hyundai WIA publishes few comparable figures for this pair.
On the rows that exist, the Hyundai WIA LV800R turns up to 800 mm (31.5 in) in diameter against 230 mm (9.1 in), and its spindle is rated 45 kW (60 HP) continuous against 22 / 11 kW (29.5 / 14.8 hp) on the Hyundai WIA LM1800TTSY.
Specifications Comparison
| Specification | Hyundai WIA LM1800TTSY | Hyundai WIA LV800R |
|---|---|---|
| Max Turning Diameter | 230 mm (9.1 in) | 800 mm (31.5 in) ▲ |
| Chuck Size | 8 in (203 mm) | 800 mm (31.5 in) table with hydraulic clamping |
| Spindle Power | 22 / 11 kW (29.5 / 14.8 hp) | 45 kW (60 HP) continuous ▲ |
Advantages
Hyundai WIA LM1800TTSY
- Two turrets and a sub-spindle finish two-operation parts in one setup
- 8 in (203 mm) chuck suited to turned parts up to 230 mm (9.1 in) with milled features
Hyundai WIA LV800R
- 800 mm (31.5 in) max turning diameter against 230 mm (9.1 in)
- 45 kW (60 HP) continuous spindle power against 22 / 11 kW (29.5 / 14.8 hp)
- 800 mm (31.5 in) table with hydraulic clamping for heavy rings, flanges and housings
Verdict
Choose by the part, because these machines do not compete. The Hyundai WIA LM1800TTSY is for small turned parts up to 230 mm (9.1 in) that need milling and back-end work finished in one setup. The Hyundai WIA LV800R is for heavy rings, flanges and housings up to 800 mm (31.5 in) in diameter, roughed with 45 kW (60 HP) of continuous power. With only three published rows to compare, part size should make the decision.